PRODUCTS

Description

The diamond logo is used when products are coated with natural diamond grit.

Application

Zirconia
Ceramics
Enamel
Practice & laboratory

Properties

Sharp-edged, constantly emerging new sharp edges
Optimal with water cooling

Description

The Champion logo is used when products are coated with natural diamond grit and have been manufactured using our special coating technology. This results in three to four times more diamond on the diamond cutter, which in turn leads to an extremely long service life.

Application

Zirconia
Ceramics
Enamel
Practice & laboratory

Properties

Sharp-edged
Constantly emerging sharp edges
Optimized service life
Optimal with water cooling

Description

The Synit logo is used when products are coated with synthetic Synit grit.
This Synit grit is an artificially produced abrasive grit substitute for diamond.

Application

Zircon
Stone
Practice, laboratory, industry

Properties

Blocky
Heat-resistant without cooling up to 1200ºC
Long service life due to moderate cutting properties
Suitable for dry grinding

Description

The Borit logo is used when products are coated with the synthetic borite grain.
This is a material similar to CBN.

Application

Ferrous metals such as steel, chromium steel Minerals such as graphite, carbides

Properties

irregularly shaped sharp-edged crystals low strength
high heat compatibility
Suitable for dry grinding

Description

The Aurit logo is used when products are coated with the synthetic Aurit grain. This material is the second hardest known material after diamond. Similar to the Champion, this grain is bonded to the blank using a special coating technology and has an extremely optimized service life.

Application

Ferrous metals such as carbide Tool steels
Precious semi-precious stones Industry

Properties

Dry grinding
Extreme hardness Heat resistance up to 1200ºC
Suitable for dry grinding

Description

The Rubynit logo is used when products are coated with natural ruby grain.

Application

plastic
Acrylic
Manicure & pedicure laboratory

Properties

Easy to cut / low temperature development

Description

The Saphir logo is used when products are coated with natural sapphire grain.

Application

Natural nails
Calluses
Calluses
Dry skin
Exposure of ingrown nails

Properties

Relatively soft stone Dry grinding
Very sharp-edged

Description

The Diarit logo is used when products are coated with natural Diarit grain.

Application

Skin
Nails
Acrylic
plastics
Laboratory

Properties

Easy to cut
Dry grinding
Sharp-edged

Diamond

Champion

Synit

Borite

Aurite

Rubynite

Sapphire

Diarite